Content

Control & Ancillaries

THERMOSTATIC CONTROL UNITS

To compliment our range of trace heating tapes and cables flexiheat offer a range of thermostats, junction boxes and all necessary ancillary’s to make sure of a straightforward and simple installation.

THERMOSTATIC CONTROL UNITS

In order to maintain the desired temperature of a trace heating system a control unit should be fitted.

Flexiheats range of control units have been designed with simplicity in mind and when fitted correctly they will ensure energy consumed is kept to a minimum, the trace heating system is only energised when necessary therefore the element will not overheat.

Flexiheats air sensing thermostat is available in two temperature ranges -30°C - + 35°C and 0°C - + 40°C, the sensing bulb is fixed externally to the unit giving a quick response to the change in air temperature.

Flexiheats temperature control thermostat is available in five temperature ranges from -30°C - + 210°C, the sensing bulb can be fixed to the pipe, tank or vessel via a 1m capillary allowing the surface temperature to be read.

Technical characteristics

  • (SPDT) capillary thermostat housed in a polycarbonate enclosure to IP66
  • Good chemical resistance
  • Good UV resistance
  • Supplied with heating tape gland and seal
  • Standard DIN rail mounted terminals for easy connections
  • Mains ON indication
  • Heating ON indication
  • Maximum load 15A
  • Pipe mounting brackets available

Both units are available with override thermostats if required.

JUNCTION BOXES

JUNCTION BOXES

Flexiheats junction boxes are for the connection or derivation of our range of heating cables.

Housed in an IP65 polycarbonate enclosure with up to 7 M20 entries is a 5-pole 2.5mm/4mm screw terminal according to DIN EN 60998. Junction box 80 x 80 x 52mm.

Pipe mounting bracket available.

PIPE MOUNTING BRACKETS

PIPE MOUNTING BRACKETS

Stainless steel fabricated thermostat / junction box mounting brackets.

TERMINATION KITS

TERMINATION KITS

Flexiheat have a wide range of termination kits available depending on tracer type and amount of connections required, please ask for details.

FIXING TAPE

FIXING TAPE

Depending on your application flexiheat recommend using either adhesive glass tape or adhesive aluminium foil tape.

SILICONE SEALANT

SILICONE SEALANT

Silicone sealant (clear) 25ml, with screw cap and application nozzle to avoid waste.

TERMINATION BOOTS

TERMINATION BOOTS

Pack of 20 silicone sealing boots (10 front / 10 rear) Complete with silicone sealant.

WARNING LABELS

WARNING LABELS

Electrically Traced warning label 1 warning label should be applied to every 3m of traced pipe work.

Top ↑